Mainova AG: eologix for Senvion turbines In this customer project, 5 Senvion turbines of the type REpower 3.4M104 were equipped with the eologix:restart system with…
GLS wind farm Schleiden – Switch to eologix:restart system with automatic restart An Enercon E-101 was equipped with the eologix:restart system. After just one winter,…
eologix:restart fast, safe and maintenance-free In this customer project five wind turbines (Enercon E115) have been equipped with the eologix:restart system. The aim was to…
Ice-Control project of Verbund has shown potential savings In the course of the research project „Ice-Control“ the wind farm Ellern, as a pilot plant, was…
The second wind turbine in Carinthia at 1400m above sea level. The turbine is painted with an edelweiss and a picture of an eastern climber.
The Bowbeat onshore wind farm was commissioned in 2003 and is one of the most powerful wind farms in Scotland.
Situated at almost 1,600 meters, the Steinriegel wind farm is one of the highest wind farms in Europe.
“The eologix system is uncomplicated and easy to install. The technology is simple but of good quality and does a very good job. The system reacts quickly and very precisely. An additional positive effect was the good project cooperation with eologix the support was very good.“
“We have chosen the eologix sensor system because it measures directly on the rotor blade and therefore ice detection is faster and more accurate than with other comparable systems.“
“Technically, it is an exciting product, as eologix is the only supplier that measures directly on the blade surface and can thus determine the icing condition. The more accurate and sensitive the ice detection system is, the higher the optimization potential of the individual plants is.”
“[…] eologix would have stopped the turbine approximately 2.5 times less than the VBS.” (Vibration-Based Systems)
“[…] the eologix system was most often the first IDS to detect the presence of light icing, it would have been the last to stop the turbine.”
“The eologix system works perfectly and provides the best information about the condition of the blade in case of ice formation. When it comes to which system is reliable, I would definitely fully recommend the eologix system – I would choose time and again the eologix solution.”
“In short: we are very satisfied with eologix.”
“Each company has to decide for itself whether to measure based on vibrations or directly on the rotor blade surface. However, it is nice that eologix carries out a precise measurement and also measures the thickness of the ice layer accurately.“
